Eurocom X7 User Manual
Page 287
Troubleshooting
Problems and Possible Solutions 8 - 23
8
Changing the System from RAID to AHCI Mode to IDE Mode
If you wish to change from a RAID mode to AHCI or IDE modes you will need to delete any existing RAID by
following the procedure below. However backup up any necessary files and data before deleting a RAID, as
doing so will result in the loss of all data on the RAID volumes.
1.
Start-up your notebook computer and press <F2> to enter the BIOS.
2.
Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and press <Enter>.
3.
Go to the RAID (listed under RAID Volumes:) and press <Enter>.
4.
Select Delete and press <Enter>.
5.
Select “Yes” (note that al the data on the volumes will be lost) and press <Enter>.
Figure 8 - 8
- Delete RAID (Advanced > Intel(R) Rapid Storage Technology)