Eurocom M570U DIVINE - Manual (Page 145)

NVIDIA Video Driver Controls
Enabling TV Display B - 11
B
Enabling TV Display
To display desktop images on a TV, connect the TV to your computer by using an
S-Video cable from the TV to the 7-pin S-Video-Out jack at the rear of the computer.
You will need to enable the TV display from the NVIDIA Control Panel as per the
instructions on
B - 7 . The TV will appear as a display option (2. Select the displays
you would like to use.) when attached to the 7-pin S-Video-Out jack. Apply the set-
tings, and then click Yes to save the changes.

Detect Displays
To get a full range of dis-
play options click “My
display is not shown in
the list...”.
Figure B - 8
Change Display
Configuration
(with TV connected)