Display modes – Eurocom M7X1CUH LYNX User Manual
Page 189
ATI Video Driver Controls
Display Modes B - 9
B
Display Modes
Single
Only one of your displays is used.
Clone Mode
Clone Mode simply shows an exact copy of the Main display desktop on the other
display(s). This mode will drive multiple displays with exactly the same content, res-
olution, refresh rates and color quality etc.
Extended Mode
Extended Mode treats both connected displays as separate devices, and they act as
a virtual desktop resulting in a large workspace. When Extended Mode is enabled,
you can drag any icons or windows across to the other display desktop. It is therefore
possible to have one program visible in one of the displays, and a different program
visible in the other display.
Function Keys
You can use the Fn + F7
key combination to tog-
gle through the display
options:
• Notebook Only
• External Display Only
• Notebook + External
Display
Give the displays
enough time to refresh.
Swap Display
Mapping
If you wish to switch the
Main and Clone dis-
plays, right-click either
the Main or Clone icon
(Displays Manager),
and then click Swap
Display Mapping.
Switching Displays Using Fn + F7
If your external display is connected to the HDMI port, and you are using the Fn + F7 Hot
Key combination to switch displays; note that the audio will not automatically switch back
to/from the HDMI connection and will need to be manually switched. See
for details.