EXFO FTB-500 - Manual (Page 41)

Getting Started with Your Unit
FTB-500 33
Turning Off Your Unit
By default, your unit will shut down when you press the power button.
However, you can configure your unit to perform a different action when
the power button is pressed.
You can also configure your unit to automatically restart when AC power
comes back after the unit has turned off (power outage, emergency
shutdown, sleep, or hibernation modes) when battery level is too low.
To exit the sleep mode (or hibernation mode) and resume your
work:
Press the On/Off button.
To turn off the unit completely from the unit itself:
Press and hold the On/Off button a few seconds until the unit beeps once.
To turn off the unit completely from Windows:
1. If necessary, from the front panel of the unit, press the
button to
show the taskbar.
2. From the lower left corner of the screen, tap the Start button ( ).
3. On the upper right corner of the screen, tap .
4. Tap Shut down.