EXFO FTB-5500B PMD Analyzer - Manual (Page 78)

Managing Results
70 FTB-5500B
Printing Data
2. From the Print tab, select the desired report type.
Note: If you do not customize the graph appearance, it will be presented with the
default settings (no zoom factor).
Note: Graphs only appear in reports if you select the Measurements Report
option.
Select which items must be included. The table below gives you more
information on possible selections.
If you have selected... Specify...
Measurements Which measurements must be included in
the report by selecting the corresponding
boxes.
You can also click Select All or Deselect All
to quickly select or clear all boxes at the
same time.