EXFO FTB-9100 for FTB-500 Optical Switch - Manual (Page 58)

SCPI Command Reference
52 FTB-9100
Product-Specific Commands—Description
:ROUTe[1..n]:SCAN:ADJust:AUTO?
Description This query returns the current value of the
<Optimize for repeatability> option. When this
option is selected, the switch mechanism returns
to a reference position before aligning to a new
position. This ensures optimum repeatability.
When this option is not selected, the switch
mechanism goes directly to the new channel
position. This provides faster switching times, but
less repeatability.
On *RST, the value of this setting is OFF.
Syntax :ROUTe[1..n]:SCAN:ADJust:AUTO?
Parameter(s) None
Response Syntax <AutoAdjust>
Response(s) AutoAdjust:
The response data syntax for <AutoAdjust> is
defined as a <NR1 NUMERIC RESPONSE DATA>
element.