EXFO TG-300B Tone Generator - Manual (Page 19)

TG-300B/LFD-300B FiberFinder 14
Operation in Cold Temperatures
Depending on the type of rubber jacket, the fiber can become very rigid in cold
environments. It is a good practice to warm the section of fiber you want to test
before installing it in the unit. It makes the installation easier and prevents
overstressing the fiber.
Contacting the Technical Support Group
To obtain after-sales service or technical support for this product, contact EXFO at
one of the following numbers. The Technical Support Group is available to take your
calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America).
For detailed information about technical support, visit the EXFO Web site at
www.exfo.com .
To accelerate the process, please have information such as the name and the serial
number (see the product identification label—an example is shown below), as well
as a description of your problem, close at hand.
Technical Support Group
400 Godin Avenue
Quebec (Quebec) G1M 2K2
CANADA
1 866 683-0155 (USA and Canada)
Tel.: 1 418 683-5498
Fax: 1 418 683-9224
[email protected]
Ver.
Mfg.
date
P/N
S/N
Made in Canada QST442B
465 Godin Avenue
Vanier (Quebec) G1M 3G7 CANADA
**************** A
January 2006 542392-3D
TG­300B
LFD­300B