EXFO MaxTester Series - Manual (Page 32)

Getting Started with Your Unit
22 MaxTester Series
Turning On or Off the Unit
To turn on the unit:
Press the On/Off button. The unit will beep once.
Note: If you turn on the unit for the very first time, a configuration wizard will be
displayed (see the corresponding section for more information).
To enter the suspend mode:
Press the On/Off button. The unit’s backlight will turn off.
To exit the suspend mode and resume your work:
Press the On/Off button.
To perform a shutdown:
Press and hold the On/Off button a few seconds until the unit beeps once.