EXFO OTDR 2 - Manual (Page 84)

Customizing Your OTDR
76 OTDR
Selecting the Default View
Selecting the Default View
You can select which view will be displayed by default once all the
acquisitions are performed (at all the selected wavelengths) and the
analysis of the last wavelength is complete. The default view will also be
used when opening a measurement file.
The table below indicates the views that can be displayed.
View Remarks
Keep current The tab selected before the acquisition is
started remains the same once the acquisition
is complete.
OTDR Displays the graph and the control dials (lists
when graph is in full view) for the OTDR
acquisitions.
For more information, see Graph on page 94.
Events Default view.
Displays the results in the Events table after an
acquisition.
Measure Displays the results in the Measure table after
an acquisition. This view allows you to take
measurement with markers manually.
Summary table This table gives, for each wavelength,
information such as: the pass/fail status of the
results, the span loss and span ORL values.
Span length is also displayed.
For more information, see Summary Tab on
page 96.