EXFO IQS-2100 Light Source for IQS-500/600 - Manual (Page 23)

Light Source 17
4 Setting Up Your Light Source
Light source features are controlled with the Windows-compatible IQS
Manager software. Please refer to the IQS Platforms user guides for
information regarding the IQS-500/600 Controller Units and IQS Manager
software conventions.
The source is controlled and operated from within the Control Center.
Depending on your source model, some or all of the following operations
are available:
³
selecting wavelength (for dual-wavelength modules only)
³
setting attenuation
³
selecting modulation
³
saving and recalling a configuration
Note: You do not need to turn on the IQS-2100 Light Source or connect it to a DUT
to set it up. To turn on the source, see Operating Your Light Source on
page 25.