EXFO PSO-100 Series Optical Sampling Oscilloscopes - Manual (Page 15)

Optical Sampling Oscilloscope 7
2 Safety Information
Laser Safety Information
Your instrument is a Class 1 laser product in compliance with standards
IEC 60825-1 and 21 CFR 1040.10. Laser radiation may be encountered at
the output port.
The following label indicates that a product contains a Class 1 source:
Note: The label is located at the back of the unit.
C
AUTION
Do not open the unit. It contains fragile fiber-optic components,
which can be damaged if the unit is opened. There is also a risk for
exposure of laser light if the unit is opened. EXFO shall not be liable
for any damages resulting from opening the unit.
W
ARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
W
ARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure or impair the protection provided by
this unit.