FeiYu Tech G4 3-Axis Handheld Gimbal - Manual

FEIYU-EN-1
FY-G4 is suitable for GoPro 4/GroPro 3+/GroPro 3, also can be compatible
with GoPro LCD backpack and the cameras with the same size.
Function
Interface Function
Button
Video Input
And
Camera
Charging
Interface
Power
Switch
Pitch Axis
Roll Axis
Indicator
Heading Axis
M2×22 Knurled
Thumb Screw
Remove the power switch
cap, insert two 18350
batteries into the handle. Install the GoPro camera by the
special Thumb Screw. And make
sure it is fixed well.
When the Gimbal is working, you
can press the function button to
switch among the three working
modes and a special working
condition freely.
The indicator flashes in red light
when in working, it will prompt the
Gimbal at fault.
1
Confirm the camera is
installed well,then press
the power button to turn
on the Gimbal.
How To Adjust The Pitching Angle: Double press the function button to enter into“Heading And Pitch Follow Mode”.
Hold the Gimbal at the desired angle, then press the button once to reengage “Heading Follow Mode” in order to lock the
angle of desired pitch.
Smooth And Steady Filming: Handheld the Gimbal, keep stable for movement, keep light and steady for walking.
Please install the suitable camera first before power on the Gimbal. Attention !
Flexible Use Of Inversion Mode: Press the function button for three times in succession, the Gimbal switch to the
inversion mode and help to captured low angle view more easily. If filming with moving forward at a high speed, keep the
handle roughly parallel with the ground will be helpful.
Selfie: Turn the Gimbal 180°so the function interface is facing you. Then, simply adjust the angle of pitch to the desired
angle by utilizing the “Heading And Pitch Follow Mode”which described above and then switch back to “Heading
Follow Mode”. Once complete you can film yourself with ease.
4
1
2 5
3
Heading Follow Mode：Camera Pitch and Roll Angles remain constant,
heading follows the handheld position.
Heading And Pitch Follow Mode：Camera Roll Angle remains constant.
Heading and Pitch follow the handheld position.
Heading Lock Mode: Heading, Pitch and Roll are all locked to point at
one position.
Use for switching
working modes.
Special Working Condition (Inversion Mode): When in any working mode, press the function button for three times in
succession, the Gimbal enter into the inversion mode and switch to the Heading following mode automatically. Invert
the Gimbal to capture more excited scenes easily by switching mode combination. When in inversion working condition
press the function button for three times in succession to reset the Gimbal back to the original state.
Charger
Input: DC 5V Min 800mA
Output: DC 4.2V
Type: 16340/18350
USB Cable
USB
USB Mini
The USB Mini terminal of the USB cable
plug into the Micro interface on the charger , and the USB
terminal plug to the power adapter, then connect to the
US Connecter according to needed .
Remove the batteries, the USB Mini
terminal insert to the function interface on the gimbal and the USB
terminal insert to the USB connecter then connect to the computer
for firmware upgrade or parameters configuration (Please
connect the USB cable to the computer with the USB connector,
otherwise the interface of the computer will be damaged ).
Ample buttons can realize the adjustment of
heading & pitch angle, mode switching etc.
Extend the capacity space for battery to
make the runtime longer.
Spiral design of the extension bar can be
perfect combination with G4 power switch；
Extended length is optional, it will help to
enjoy a different visual easily.
The Gimbal can power supply for the Gopro
camera, and analog video signal can output
through this cable.
Please refer to following method to proper
usage, otherwise it may cause damage to
the device itself and other equipment.
!
Item LED Status Function Explanation
Single Press Single Flashes Heading Follow Mode
Double Press Double Flashes Heading And Pitch Follow Mode
Long Press For 1 Second On Constantly Heading,Pitch And Roll Are All Locked
Identify the working
mode via switch to
different status of the
indicator light.
Indicator Explanation
LED Status Explain
Blue light flashes
three times
Full Power
Blue light flashes
twice
Enough Power
Blue light flashes
once
Low Power
Blue light keeps
flashing
No Power
Type: 18350
If any comments or suggestions please do not hesitate
to e-mail us directly : [email protected]