Generalmusic wk1or - Manual (Page 80)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Midi/General 73
TUNING: (-63/63) This function indicates the overall tuning of WK1Or, and
can be modified using the TEMPO/DATA key. The 00 value corrresponds
to standard tuning of the “A” note in 440 Hz.
DYNAMIC: Using the TEMPO/DATA key in this section helps you obtain a
harder or softer keyboard to react to your touch. 3 options to modify the
dynamic response are available: soft, normal and hard.
Note: the “OFF” indication shows that the keyboard is no longer dynamic.
Serial Computer: in case WK1Or is connected to a PC through a serial
port, it is necessary to select the type of connection according to the
computer used (PC1, PC2, MAC).
Video type=PAL (Europe): Enables video standard type
according to the TV system used. You can select between PAL
and NTSC.
Text Lyrics: shows the lyrics of the Song both on an external mo-
nitor or TV set and on the display.
Important: If you are not going to make any connection to the serial
MICROTUNE
00:MicroX: (01 … 127) This parameter fine tunes an individual note of the
Arabic Scale in steps of 1/127th of a tone. The note “X” has the range: C,
C#, D, Db, E, F, F#, G, Ab, A, Bb, B.
Play the Arabic note of the current Arabic Scale that needs tuning on the
keyboard.
Use the TEMPO/DATA buttons to fine tune the selected Arabic note. The
value of 32 corresponds to the standard Arab tuning.
MIXER LOCK
MixLock: (On/Off) This parameter, when set to ON, locks the volume set-
tings of the track for all performances, allowing you to change Perform-
ances and Styles without altering the current volume balance of all the
tracks. Whatever changes are made to the Volume settings when ON remain
memorized even after turning off the instrument.
Use the TEMPO/DATA buttons to toggle between On and Off.
DSPLock: (On/Off) This parameter, when set to ON, locks the effects
settings (Reverb and Chorus) for all Performances and Styles, allowing
you to change Styles and Performances without altering the current effect
settings.
Use the TEMPO/DATA buttons to toggle between On and Off.