Denon AVR-786 - Manual (Page 34)

31
ENGLISH
ENGLISH
Advanced Operation
Remote control unit
Operating DENON audio components
1. CD player (CD), CD recorder and MD recorder (CDR/MD)
system buttons
Advanced Operation
1 Set the MODE 1 switch to “AUDIO”.
2 Set the MODE 2 switch to the position for the
component to be operated (CD, CDR/MD or
TAPE).
3 Operate the audio component.
For details, refer to the component’s operating instructions.
While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that
some component models cannot be operated with this
remote control.
6 , 7 : Manual search (forward and reverse)
2 : Stop
1 : Play
8 , 9 : Auto search (cue)
3 : Pause
DISC SKIP + : Switch discs (for CD changers only)
2. Tape deck (TAPE) system buttons
6 : Rewind
7 : Fast-forward
2 : Stop
1 : Forward play
0 : Reverse play
A/B : Switch between decks A and B
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel up/down
TUNING +, – : Frequency up/down
BAND : Switch between the AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
• TUNER can be operated when the switch is at “AUDIO”
position.
MODE 2
ON/SOURCE
MODE 1
NUMBER
OFF