Glow-worm Clearly Solar Controller - Manual (Page 17)

17
Changing the current time hh:mm
From the main screen press the button three times.
The current hour then flashes. You can adjust the hour by
pressing the
or buttons. Press once. The
current minute indicator flashes. Again using the or
buttons adjust the minute indicator. When the required
time is displayed, press mode. Press repeatedly
until the main screen is displayed again.
Settings
Settings in the Programmer menu
Settings in the Programmer menu
You can create a DHW program with up to three time peri-
ods for reheating the solar cylinder. The Fluropro includes
a default program which can be customised to meet your
individual needs.
Time window Weekday /
Block of days
Start time End time
H 1 MO - SU 6:00 22:00
H 2 — — —
H 3 — — —
Table 1. Default cylinder reheat program
Diagram 9