Glow-worm Climapro 1 - Manual (Page 4)

0020140263_00 - 11/11 - Glow-worm - 4 -
1
B A
Key
1 Pre-cut part of the electrical box
radio receiver in the control box unit
1
2
2
B
A
Key
1 Control box unit
2 Radio receiver
i IMPORTANT:
The receiver should be installed
outside the appliance if the appliance
control box does not have a location for
the radio receiver.
radio receiver outside appliance
2
1
3
Key
1 Radio receiver
2 Fixing screw
3 Drilling
4 Electrical connections
e DANGER:
Incorrect installation can cause electric
shock or damage to the equipment.
The electrical connection must be
made only by a qualifi ed engineer.
b ATTENTION:
Do not connect the room thermostat to
a 230V terminal.
230
V
RT
230 V
FP L N
i IMPORTANT:
Do not remove the link (RT 24V) from
the room thermostat connection on the
boiler main pcb.
• Use a connecting cable that complies with the
technical specifi cations (refer to the technical
data chapter).
i IMPORTANT:
The location of the EBUS terminal block
varies according to the heating system.
It is always identifi ed by having «BUS»
written on it.
INSTALLER
EN