Glow-worm Ultracom2 sxi - Manual (Page 14)

0020092786_01 - 04/10 - Glow-worm - 12 -
HOW TO OPERATE YOUR APPLIANCE
Adjustment for the water temperature
in the heating circuit
• Press the buttons or of the
function to adjust the temperature of
the water in the heating circuit.
Temperature of the water
(°C)
min. 10
recommended 50
max. Pre-set by the installer
NOTE: If a Glow-worm outdoor sensor or
Glow-worm intelligent controls are fitted,
the temperature of the water in the heating
circuit is calculated by the boiler. It is
neither necessary nor possible to adjust it
manually.