GoDEX EZ Viewer - Manual (Page 6)

1-4. Operation of Three keys
Pause Key
When pressing the Pause key in standby mode, the printer will go into the Pause Mode, and LCD display will indicate
“EZ-xxxx Vx.xxx Pause.” At this time, printer won’t be able to receive any command; but when pressing the Pause key
once again, the printer will get out of the Pause mode and go back to standby.
Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time,
the printer will continue with the rest of the print job. For example, if the print job contains 10 labels, press the Pause
key after 2 labels are printed to stop printing; when pressing the Pause key again, printer will finish printing the
remaining 8 labels.
Cancel Key
When pressing the Cancel key while printing, the LCD Display will show “xxxxxxxx Cancel,” this means the printer
cancels the current print job. For example, if the print job contains 10 labels, press the Cancel key after 2 labels are
printed, the remaining 8 labels won’t be printed, and the printer goes back to standby.
Feed Key
When pressing the Feed key, printer will send the media (according to media type) to the specified stop position.
When printing with continuous media, when pressing the Feed key, the printer will feed media out to a certain length.
When printing labels, pressing the Feed key, the printer will feed one label at a time; if the label is not sent out in a
correct position, then please proceed with the Auto Sensing.
5