GoldenEar Invisa 650 - Manual (Page 11)

11
Adjusting the Pivoting Tweeter
The Invisa ® speakers incorporate an aim-able tweeter assembly to compensate for less than ideal placement
situations, and to allow for an effective “toe-in” for In-Wall pairs. If your installation location is such that the primary
listening area is well off axis from the speaker, the tweeter assembly can be rotated and tilted to allow it to be
“aimed” at the listening area (See Figure 9). To aim the assembly for best results:
1. With the speaker installed and the grille off, rotate the tweeter assembly so that the bars/slots are
horizontal when viewed from the listening position;
2. Again, while viewing from the listening position, tilt the tweeter assembly toward the listening position;
3. For In-Wall applications, tilt the tweeter inward towards the center to create “toe-in.”
Figure 9