Delta PG PLUS-25 User Manual

Page 64

Advertising
background image

58

Maintenance Schedule

SECTION XV - Maintenance Schedule

Service Technician

At least on an annual basis the following main-
tenance should be performed by a qualified ser-
vice technician:

General

•

Attend to any reported problems.

•

Inspect the interior of the combustion
chamber; clean and vacuum if necessary.

•

Clean the condensate trap in the vent
system and fill with fresh water.

•

Check for leaks; water, gas, flue and
condensate.

•

Verify flue vent piping and air inlet pip-
ing are in good condition and sealed
tight.

•

Check primary system water pressure/
primary system piping/primary expan-
sion tank.

•

Check domestic water pressure/domes-
tic system piping/domestic thermal
expansion tank.

•

Check domestic and primary thermo-
stat settings.

•

Check ignition electrode (sand off any
white oxide; clean and reposition).

•

Check ignition wiring and ground
wiring.

•

Check all control wiring and connections.

•

Check burner flame pattern (stable and
uniform) and flame.

Additional items if combustion or performance
is poor:

•

Clean baffles and flue ways.

•

Remove burner assembly and clean
burner head using compressed air only.

Once the maintenance items are completed,
review the service with the owner.

Owner Maintenance

Daily:

•

Check the area around the unit.

•

Check the combustion air inlet and ven-
tilation openings for blockage.

•

Check the temperature/pressure gauge.

Monthly:

•

Check vent piping.

•

Check combustion air inlet piping.

•

Check the pressure relief valve.

•

Check the temperature/pressure relief
valve.

•

Check the vent condensate drain system.

•

Check the automatic air vents in the pri-
mary system.

Every 6 months:

•

Check both primary piping and gas
supply piping for corrosion or potential
signs of leakage.

•

Operate the pressure relief valve.

•

Operate the temperature/pressure relief
valve.

Periodically:

•

Check the operation of the domestic
mixing valve.

Follow the maintenance pro c e d u re s
given throughout this manual. Failure
to perform the service and maintenance
or follow the directions in this manual
could result in damage to the PERFOR-
MANCE PLUS or in system compo-
nents, resulting in severe personal
i n j u ry, death or substantial pro p e rt y
damage.

WARNING

Advertising
This manual is related to the following products: