Hall Research U97-H2 - Manual (Page 8)

Model U97-H2
6
Figure 4 Receiver (Remote) Unit’s Connections to User’s Console
Operation
The U97-H2 will allow only the local or remote to communicate with the
PC at any given time. After either stations stops sending keyboard or
mouse data, there is a 2 second delay before the other station can start
sending data to the PC. If the Local LED on the Sender is lit then only the
local station may communicate with the PC. If the Remote LED on the
Sender is lit then only the remote station may communication with the PC.
If neither LED is lit then either station may communicate with the PC. As
soon as one station begins to communication with the PC, that LED will be
lit and the other station will not be able to communicate with the PC.
The Link LED on the Sender and the Link LED on the receiver indicate
when there is a successful link between the Sender and Receiver units. If
the Link LED’s are on then there is a successful link between the Sender
and Receiver.