Hall Research SC-HDMI-2A - Manual (Page 6)

Model SC-HDMI-2A
4
2. Installation
Figure 1 - Inputs
HDMI
– HDMI input from source
AUDIO
– 3.5mm stereo jack input from source
TOSLINK
– S/PDIF Optical (TOSLINK) input from source
DC 5V
– 5V DC voltage, center positive
Figure 2 - Outputs
HDMI
– HDMI output to display
AUDIO
– 3.5mm stereo jack output to audio system
TOSLINK
– S/PDIF Optical (TOSLINK) output to digital audio
receiver
Up arrow
– Navigate up in OSD menu. Push in combination with
MENU button to switch to XGA resolution.
MENU
– Push to bring up OSD menu. Push to select in OSD.
Down arrow - Navigate down in OSD menu. Push in
combination with MENU button to switch to 480p resolution.
Notice
Use only regulated 5v DC supply as supplied with
the unit. Use of any other voltage will cause
damage to the unit and
void the warranty .