Backup lamp, side marker lamp, tail/turn, Lamp, and tail/stop lamp – Dodge 2010 Charger User Manual
Page 423
Advertising
Backup Lamp, Side Marker Lamp, Tail/Turn Lamp,
and Tail/Stop Lamp
1. Open the trunk.
2. Remove two fasteners from the back of the taillamp
assembly.
3. Pull back the trunk liner.
4. Remove the remaining fastener from the back of the
taillamp assembly.
5. Push the electrical connector locking tab to the side.
6. Disconnect the electrical connector.
7. Pull the taillamp assembly clear from the vehicle to
access the bulbs.
422
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: