Hall Research M1-TM User Manual
Page 4
The Student's Module (Model M1-SM), comes with a short video cable (HD15 male-to-male), a short mini-stereo
audio cable, and a 12 vdc power adapter.
• Plug the video cable supplied in the box from the PC's video output port to M1-SM's LOCAL IN.
• Plug the student's monitor to the MONITOR connector on the unit.
• Connect the unit's AUDIO OUTPUT to the PC's sound input (LINE IN).
• Leave the student's speakers (or headphones) plugged into their computer as they were before.
• Connect the power adapter to the power terminal on the unit.
The two CHAIN IN and CHAIN OUT of the Module are used to interconnect Student units using the CVGX
cables. At the end of each chain you must place a Model TM-75 terminator at the CHAIN-OUT port of the M1-
SM.
Typical Installation Diagram
If you have any problems or questions, you can reach Hall Research at (714) 641-6607, fax -6698, or contact HRT
via email at [email protected].
Warranty
HRT warrants that the supplied equipment is free from defective workmanship and material. Subject to the
agreements set forth, will repair or replace, at its option, the defective components for a period of 2 years after
purchase. The following conditions apply to the Warranty:
•
Warranty void if item subject to improper use, negligence, or unauthorized modification
•
Instructions must be followed in obtaining RMA number as explained below
•
Any defective part should be returned, insured and freight prepaid, to Hall Research, with the following:
Return Material Authorization Number (RMA#)
Description of failure, as detailed as possible
Shipping address and contact name and phone number
Limited Liability
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABLITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM
DIRECT, INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMANGES RESULTING FROM THE USE OF
THE PRODUCT OR ITS DOCUMENTATION
© Copyright 2005. Hall Research Technologies, Inc. All rights reserved.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
4
of
4