Hall Research TVB-400A - Manual (Page 10)

8
TV-to-VGA / HDTV Video Scaler
Resolution mode: If the output is set to a RGBHV PC resolution,
press ▲or▼ buttons to choose from 640 x 480(VGA), 800 x 600
(SVGA), 1024 x 768(XGA), or 1280 x 1024(SXGA) PC output. If
output is set to a HDTV YPbPr resolution, then press ▲or▼ to
choose from 480p, 576p, 720p or 1080i HDTV output.
Output mode: Press ▲or▼ to select between a PC RGBHV
output and the HDTV YPbPr output.
Aspect mode: Press ▲or▼ to choose between Standard, 4:3 aspect
and 16:9 aspect ratios.
3D Enhance mode: To turn on or off the 3D comb filter function.
When VCR or non-standard video source is connected to the input
the output picture may jitter. If this occurs, turn off the 3D Enhance
function.
Digital NR mode: To turn on or turn off the digital noise reduction
function.
Blanking mode: To turn on or turn off the video blanking function.
Freeze Video mode: To turn on or turn off the video freeze frame
function.
3 3 . .
Adjust: Press the button to toggle through the adjustment
parameters as follows:
Hue > Detail > Contrast > Brightness > Color > Volume
Hue: Press ▲or▼ to adjust NTSC Hue level. The range of
adjustment is 0~63. Factory defaults value is 31.
Detail: Press ▲or▼ to adjust the Detail level. The range of
adjustment is 0~63. Factory defaults at 10.
Contrast: Press ▲or▼ to adjust the Contrast level. The range of
adjustment is 0~63. Factory default value is 58.
Brightness: Press ▲or▼ to adjust the Brightness level. The range
of adjustment is 0~63. Factory default value is 31.
Color: Press ▲or▼ to adjust the Color level. The range of
adjustment is 0~63. Factory default value is 31.