Hanna Instruments pH 209V - Manual (Page 8)

15 14
ELECTRODES
HI 1048B
Glass body, double junction, refillable pH electrode with
BNC connector and 1 m (3.3') cable, for wine, must and
grape juice
FC 100B PVDF body, double junction, refillable, pH electrode with
BNC connector and 1 m (3.3') cable, for food industry
FC 200B PVDF body, open junction, conic tip, Viscolene, non-refillable
pH electrode with BNC connector and 1 m (3.3') cable, for
meat & cheese
FC 210B Glass body, double junction, conic tip, Viscolene, non-
refillable pH electrode with BNC connector and 1 m (3.3')
cable, for milk and yogurt
HI 3131B Glass body, refillable, platinum ORP electrode
HI 3230B Plastic body, gel-filled, platinum ORP electrode
HI 4430B Plastic body, gel-filled, gold ORP electrode
OTHER ACCESSORIES
HI 710005
115 Vac/12 Vdc power adapter, US plug
HI 710006 230 Vac/12 Vdc power adapter, European plug
HI 76405 Electrode holder
HI 8427 pH and ORP electrode simulator with 1 m (3.3') coaxial
cable ending in female BNC connectors
HI 931001 pH and ORP electrode simulator with LCD and 1 m (3.3')
coaxial cable ending in female BNC connectors
HI 98501 Pocket-size thermometer (range -50.0 to 150.0°C)
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is used.
Operation of this instrument in residential area could cause unacceptable interferences to radio and TV equipment, requiring the
operator to take all necessary steps to correct interferences.
The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching this glass bulb at all times.
During calibration of instruments, ESD wrist straps should be worn to avoid possible damage to the electrode by electrostatic
discharge.
To maintain the EMC performance of this equipment, the recommended cables noted in the user's manual must be used.
Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC performance.
To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 Vac or 60 Vdc.
To avoid damage or burns, do not perform any measurement in microwave ovens.
WARRANTY
All Hanna Instruments meters are guaranteed for two years against defects
in workmanship and materials when used for their intended purpose and
maintained according to instructions.
Electrodes and probes are guaranteed for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance
are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by the
warranty, you will be notified of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Returned Goods Authorization
number from the Customer Service department and then send it with shipping
costs prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.