Resetting the temperature cutoff switch, Remote control – Dimplex DF3215NH User Manual
Page 11

11
* Flame only function of DF3215NH
Resetting The Temperature Cutoff Switch **
Should the heater overheat, an automatic switch will turn the heater
off and it will not come back on without being reset. The temperature
cutoff switch can be reset by unplugging the unit, waiting five (5)
minutes and plugging the unit back in.
CAUTION: If you need to continuously reset the heater, unplug the
unit and call Dimplex North America Limited at 1-888-346-7539 for
technical support.
** Not applicable on DF3215NH model fireplaces.
Remote Control
The remote control has a range of approximately 50 feet (15.25 m).
It does not have to be pointed at the fireplace and can pass through
most obstacles (including walls). It is supplied with 243 independent
frequencies to prevent interference with other units.
Battery Installation (Figure 5)
1. Depress the tab on the battery cover on the
back of the remote transmitter and remove
battery cover.
2. Install two (2) AAA batteries into the remote
control (included).
3. Ensure child lock is in the “unlocked”
position.
4. Replace the battery cover.
!
NOTE:
When the
symbol is present
on the remote control, it is recommended to
replace the batteries promptly to maintain
full functionality of the remote/fireplace.
The remote transmitter has a battery backup time of only several
hours.
Batteries
Figure 5
child Lock