Accessories, Battery replacement – Hanna Instruments HI 95747C User Manual
Page 18
18
REAGENT SETS
HI 95747-01 Reagents for 100 tests
HI 95747-03 Reagents for 300 tests
OTHER ACCESSORIES
HI 95747-11
CAL CHECK
TM
Standard Cuvets (1 set)
HI 710009
Blue rubber boot
HI 710010
Orange rubber boot
HI 721310
9V battery (10 pcs)
HI 731318
Tissue for wiping cuvets (4 pcs)
HI 731331
Glass cuvets (4 pcs)
HI 731335
Caps for cuvets (4 pcs)
HI 93703-50 Cuvets cleaning solution (230 mL)
ACCESSORIES
Battery replacement must only take place in a
non-hazardous area.
Simply slide off the battery cover on the back of
the meter. Detach the battery from the terminals
and attach a fresh 9V battery while paying attention
to the correct polarity. Insert the battery and
replace the cover.
BATTERY REPLACEMENT
FACTORY CALIBRATION RESET
It is possible to restore factory calibration:
• Enter the
calibration mode
by holding CAL
CHECK
TM
for three seconds
.
• Hold ZERO for 10 seconds. The display will
show for 2 seconds “F.CAL” and "747" appears.
The factory calibration is automatically restored
and the instrument is ready for measurement.