Care and maintenance, Hydrostat oil maintenance procedure – Dixon ZTR 7525 User Manual

Page 31

Advertising
background image

31

CARE AND MAINTENANCE

HYDROSTAT OIL MAINTENANCE PROCEDURE:

Check the oil level in hydrostatic transmisison oil

reservoir after every 25 hours of usage. Clean the oil

reservoir cap and the area around it prior to removal.

Check the oil level. Oil should be approximately 1-3/8”

below top of oil tank. Replenish as needed with SAE

20W-50 motor oil. DO NOT OVERFILL. When

checking the oil level, be very careful to keep the

reservoir clean.

Change the oil in the reservoir and hydrostat

transmission oil filter after the first 100 hours of use.

Then every 500 hours after that. Remove the filter and

be sure all oil has drained from the reservoir. Replace

with a new OEM filter (P/N 7252) and SAE 20W-50

motor oil.

Please dispose of used oil at proper collection centers -

protect your environment

Advertising
This manual is related to the following products: