Hanna Instruments HI 9829 - Manual (Page 67)

67
11.2.1 One Sample On Meter
Use this option to log one set of enabled measurement parameters to the meter
memory.
• If there are no lots saved on the meter, press
<New> to create a new lot. Use the keypad to
enter the desired lot name and press <Accept>
to confirm. Press <OK> to log the sample in
the selected lot.
• If there are existing lots on the meter, the meter
will suggest a lot to store the sample. Press
<OK> to use the selected lot. This will add the
new sample data to the displayed lot. Press
<Options> to select a different lot or the creat
a new lot. (Note: If you press <OK> you can-
not add a remark or Tag the data. Use <Op-
tion> to add remarks or Tag data. ) A new lot
can be created by pressing <New>. Press
<OK> to log the sample in the selected lot.
• On the “Remarks” window, select <Yes> to go
to the Remarks screen. Press <No> to skip this
option. If <Yes> is selected, select a remark
from the list, or press <New> to create a new
remark.
• On the “Read tag” screen, touch the location’s
iButton ® with the meter’s tag reader. Otherwise,
press <Skip> to skip this option.
• If t he tag is touched, the associated ID will be displayed. If no ID is associated
to the tag, the serial number is shown.
• The message “Sample logged” will flash momentarily and the display will auto-
matically return to the measurement screen.