Hanna Instruments HI 93501 - Manual (Page 12)

12
Hanna offers a wide range of probes to meet your needs with air,
liquid, penetration and surface measurements.
All Hanna temperature probes are pre-calibrated at the factory and
ready-to-use. These interchangeable probes make it possible to switch
from one probe to another without requiring recalibration.
Hanna probes are also available in different handle colors to avoid
cross contamination during testing.
Note: To clean the meters, do not use aggressive detergents. It is
recommended to use water.
FOR HI 93501 AND HI 93501S
HI 762A Air probe, w/1 m (3.3') cable & white handle
HI 762A/10 Air probe, w/10 m (33') cable & white handle
HI 762BL General purpose liquid probe, w/1 m (3.3') cable
& black handle
HI 762L General purpose liquid probe, w/1 m (3.3') cable
& white handle
HI 762L/2 General purpose liquid probe, w/2 m (6.6') cable
& white handle
HI 762L/10 General purpose liquid probe, w/10 m (33') cable
& white handle
HI 762PBL General purpose penetration probe w/1 m (3.3')
cable & blue handle
HI 762PBL/10 General purpose penetration probe w/10 m (33')
cable & blue handle
HI 762PG General purpose penetration probe with 1 m (3.3')
cable and green handle
HI 762PG/10 General purpose penetration probe w/10 m (33')
cable & green handle
HI 762PR General purpose penetration probe w/1 m (3.3')
cable & red handle
HI 762PR/10 General purpose penetration probe w/10 m (33')
cable & red handle
HI 762PW General purpose penetration probe w/1 m (3.3')
cable & white handle
HI 762PW/10 General purpose penetration probe w/10 m (33')
cable & white handle
TEMPERATURE PROBES