Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 16)

Physical Connections
16
IND100133-42
DVI-I IN:
Connect your DVI cable to the DVI-I 29P Connector (female). The DVI-I connector can function as regular RGB IN by
using a DVI-I > RGB/VGA adapter. Secure the DVI cable to the hex spacers provided on the unit and make sure you
do not bend any of the pins inside the connector. Connect the other end of the cable to the DVI connector on your
equipment and secure it.
Important note for DVI signal detection:
Please note that for the operating system to detect DVI signals correctly, the DVI cable MUST be connected physically
to the unit during boot up otherwise you may experience a black image. Furthermore certain graphics drivers
may need to refresh their device list (often done manually by user - detect devices), while in some cases the
Plug-n-Play will automatically detect the DVI signal correctly. Please consult your local technician if you have this
behaviour of detection problems when using DVI. In all cases the problem can be solved in the operating system, and
this is not a malfunction in the graphic controller for units.
POWER INPUT:
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input.
POWER OUTPUT:
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input.