1 probe filter, Filter, probe, Probe filter – Heath Consultants GT Series User Manual
Page 126: 1 probe filter -2
Advertising
12-2
USER HANDBOOK
12.2.1 Probe Filter
1) Hold the probe filter bulb then unscrew the probe
connector in a counter clockwise direction and
remove the connector from the probe filter bulb as
shown in Fig. 12.1.
Note:
The probe washer is not removed at this
stage.
PROBE CONNECTOR
PROBE WASHER
(Part No. 12379)
PROBE FILTER BULB
PROBE TUBE
(FLEXIBLE PROBE ASSEMBLY)
Fig. 12.1 Probe Connector Removal
2) Hold the probe tube then unscrew the probe filter
bulb in a counter clockwise direction and remove
the bulb from the probe sensor assembly as shown
in Fig. 12.2.
Advertising