HITEC Sky Scout (2GO) - Manual (Page 3)

3
Fly high with Hitec
Section One: Sky Scout 2Go Versions
(READY TO GO) stock# 13207
This version includes everything you need to fly your Sky Scout after a few easy assembly steps.
Semi-assembled model
Hitec Lite 4 2.4GHz 4-channel Radio (w/4AA aIkaline batteries)
Hitec Minima 6S Receiver (installed)
Hitec HS-55 Servos (installed)
(HITEC TO GO) stock# 13209
This version allows you to fly your Sky Scout with the Hitec radio you already have or may wish to purchase. Any of Hitec’s
AFHSS 2.4GHz radios, or radios using a Spectra 2.4GHz module, can be linked with the Minima 6S included in the H2GO set.
Semi-assembled model
Hitec Minima 6S Receiver (installed)
Hitec HS-55 Servos (installed)
C2812-1100 Brushless Outrunner Motor (installed)
(PLUG-IN TO GO) stock# 13210
This Sky Scout version is for modelers who already own the additional products needed for flying. A transmitter, receiver,
charger and suitable batteries are required to fly the model plane.
Semi-assembled model
Hitec HS-55 Servos (installed)
C2812-1100 Brushless Outrunner Motor (installed)
Hitec HBE-18A ESC (installed)
C2812-1100 Brushless Outrunner Motor (installed)
Hitec HBE-18A ESC (installed)
HLP-3S 1300mah Li-Po battery (included)
CG-115 DC Balancing Charger (included)
Hitec HBE-18A ESC (installed)
HLP-3S 1300mah Li-Po battery (included)
CG-115 DC Balancing Charger (included)
Thank you for purchasing Hitec’s Sky Scout.
Developed and engineered by Multiplex, manufactured by Hitec, the Sky Scout is an ideal model for all users interested in model flying, regardless of
age or gender. The Sky Scout is easy to fly, even for beginners. This instruction manual includes the model specifications, safety precautions and
assembly instructions for the R2Go, H2Go and P2Go versions of the Sky Scout. Please be sure to read this manual in its entirely before beginning
the assembly and operation of your Sky Scout Model Kit.
Warning : Be sure to read this section for your own safety.
Caution : Be sure to read this section to prevent accidents and damage to your model.
Tip : This section will help you maximize the performance of your model.
Note : This section will provide more detailed explanations.
The Sky Scout is a radio control model plane designed for users over age 14. For those under age 14, please seek the help of your parents,
guardian or the help of a skilled RC pilot. Improper assembly or user negligence can lead to serious injury and/or property damage to
yourself or other persons. Hitec is not responsible for any damages or injuries caused by the user’s negligence or improper assembly of the
model. Be sure to read the instruction manual thoroughly before assembly and flying.
The Sky Scout is manufactured of ELAPOR, a material highly suited for model airplanes. ELAPOR is light, durable and unlike traditional
foams it can be bonded successfully with traditional cyanoacrylate adhesives and activators. Do not use foam-safe or “odorless” CA, epoxy
or other household glues. It is recommended that you wear safety goggles when using CA glue and be sure to follow the manufacturer’s
safety instructions for its use.
Specifications
Wingspan: 1366mm (53.75 in.)
Overall length: 977mm (38.5 in.)
Min. all-up weight, standard: 700g (24.7 oz.)
Wing area, approx.: 28dm2 (434 sq. in.) (wing + tailplane,
excl. fuselage)
Min. wing loading: 25g / dm2 (8.2 oz/sq ft)
RC functions: rudder, elevator and throttle, optional ailerons