HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 6)

6
WarnInGs and safeTY noTes (cont.)
•
A battery pack which consists of different types of cells
(including different manufacturer’s cells)
•
A battery that is already fully charged or just slightly
discharged
•
Any non-rechargeable batteries (these pose an explo-
sion hazard)
•
A faulty or damaged battery
•
Batteries installed in a device or which are electrically
linked to other components
•
Batteries that are not expressly stated by the manufac-
turer to be suitable for the currents the charger delivers
during the charge process
Please bear In MInd THe folloWInG PoInTs before
You coMMence cHarGInG:
•
Did you select the appropriate program suitable for the type
of battery you are charging?
•
Did you set up the adequate current for charging or discharg-
ing?
•
Have you checked the battery voltage? Lithium battery packs
can be wired in parallel and in series, i.e. a 2-cell pack can be
3.7V (in parallel) or 7.4V (in series).
•
Have you checked that all connections are firm and secure?
•
Make sure there are no intermittent contacts at any point in
the circuit.