Imaxrc PCard-FA - Manual (Page 4)


Program procedure
1. Connect the PPM wire of ESC to program card properly.
2. Connect the battery to ESC, program card will display “READ”, the program card can
automatically detect the ESC is used for Car or for Plane and read parameters from the
ESC.
3. Display the version of the ESC. If it is the ESC for Plane and will display “P x.x”; if it is the
ESC for Car and will display “C x.x”, then display the first item after one second.
4. Press key to browse parameter items.
5. Press key to enter the item which needs to modify. After entering the item, the
parameter value is flashing.
6. Press key to modify value (if the parameter value is more than one digit. press key to
shift to different digits.)
7. Press key to confirm the modified value and exit.
8. Press WR key to save the setting parameter to the ESC, and “good” will be displayed.