Dometic RM7732 User Manual

Page 29

Advertising
background image

26

DOMETIC® RM7030/RM7732

Refrigerators

DIAGNOSTIC SERVICE MANUAL

RM7732:

SECURING THE REFRIGERATOR:

After the refrigerator is mounted in place (ensuring a

combustion seal at the front frame), the refrigerator is to

be secured in the enclosure with six screws. The screws

have to be installed in the following order:

STEP 1: Two screws installed through the front

base, which includes the lower front strip installa-

tion.

The refrigerator is provided with a lower front strip

(shipped as a loose part). The front strip is to be

attached after the refrigerator is set into the cutout

opening.

A. Install the lower front strip by maneuvering it under

the bottom hinge plates, as shown in FIG. 7.

B. Secure the refrigerator and the lower front strip with

two screws: One screw through each hinge. See

FIG. 8.

STEP 2: Install the two screws in the top frame.

A. The top decoration panel must be removed from

the refrigerator before the screws can be in-

stalled. Open refrigerator door and gently push

the tabs out of the hole in the hinge with flat blade

screwdriver. See FIG. 9.

FIG. 7

FIG. 8

B. Carefully tilt the top decoration panel and lift up to

remove from top frame. See FIG. 9.

C. Install the second two screws in the top frame as

shown in FIG. 10.

STEP 3: Two screws installed in the rear base.

See FIG. 11

Failure to follow the sequence in securing refrigera-

tor in the enclosure can cause leakage between the

frame and cabinet.

FIG. 9

USE SCREWDRIVER

TO PUSH TABS OUT

OF HOLE

FIG. 10

FIG. 11

Screws

Advertising
This manual is related to the following products: