JUGS Sports L-Shaped Screen - Manual

SAVE THESE INSTRUCTIONS
C. Snap the
3-way
fitting on
the longer
side of the
middle
section
onto the
single
upright
piece.
Step 4: Top Section
A. Snap together the pieces of the top
section.
B. Connect the top section to the 3-way
fittings on the middle section, making
sure the lock buttons on the bars of
the top section are facing the same
direction as the holes in the bars of
the middle section. The frame of your
JUGS Quick-Snap
® L-Shaped Screen
is now complete.
Step 5: Netting
A. After completing the frame assembly,
carefully tilt the frame forward and lay
it on the ground.
B. Then, stretch the netting out across the
ground with the open end just
touching the top of the frame.
C. Stand in the center of the frame and
begin pulling the netting onto the
tubing, alternating sides as you go.
D. Finally, stand your screen back up. Your
JUGS Quick-Snap ® Screen is now
complete.
L-Shaped
Protective
Screens
ASSEMBLY
INSTRUCTIONS
If you need
more information about
this product
or any other
JUGS product or service,
please contact
the manufacturer:
In the USA and Canada,
call toll-free:
1-800-547-6843.
For International Orders,
call collect:
0-503-692-1635.
Our fax number is
1-503-691-1100.
Visit our website at
www.jugssports.com.
Se habla español.
© 2008 JUGS Sports
QSLSPSI-1008