Konig Electronic IR remote control extender - Manual (Page 3)

3
Application 2:
1. Connect the IR extension cable and
IR receiving sensor to the infrared
receiver as shown in the picture.
2. Place the IR eyes precisely in front of
the IR sensors of the equipment.
3. Connect the power supply.
Operation:
15°
15° 15°
15°
0.3m 5.7m
6m
Specifications:
• Operating Voltage: 12 V DC, 250 mAh
• Power Consumption:
1W (max)
• Effective Operating Range: 6M (min)
• Infrared Tuning Frequency: 30~60KHz
• Extender Probe: 3 IR eyes on 2 meter cable
Safety precautions:
Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product
to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.