Konig Electronic Thermo hygrometer weather station - Manual (Page 2)

2
ENGLISH
A. Mode switch able
Press [MODE] to switch among the status of Time, Alarm and Calendar.
B. Time Mode
1). Starting from the normal time display status, press [SET] 2 seconds to enter the setting
status of 12/24hr, Hour, Minute. Press [ADJUST] to plus one. Press [MODE] to quit the
setting status.
2). Under MAX or MIN temperature display status, press [MAX/MIN] for 2 seconds to clear the
memory of MAX, MIN temperature and replace with current value.
3). In normal time display status, press [MAX/MIN] key to check the MAX, MIN of temperature
and hygrometer.
4). In normal time display status, press [C/F] key to change the °C and °F degree display
C. Alarm Mode
1). Starting from the normal time display status, press [MODE] key once to enter the waiting
status of alarm setting, then press [SET] 2 seconds to set the Alarm time of Hour and press
[SET] again to set Alarm time of Minute. Press [ADJUST] to plus one. After setting, press
[MODE] to quit the Alarm setting status.
2). Starting from normal time display, press [MODE] to enter Alarm status, then press [ADJUST]
to switch the Alarm, and the beep, each hour.
3). Press [MODE] key to quit.
D. Calendar Mode
1). Starting from normal time display, press [MODE] twice to enter waiting status of Calendar
setting, press [SET] key for 2 seconds to enter Year setting, press [ADJUST] to plus one.
Press [SET] and [ADJUST] key in turn to adjust Month, Date accordingly.
2). Press [MODE] to quit the Calendar Mode and resume the Time display status.
E. SNOOZE Mode
1). When the alarm activates, press [SNOOZE/LIGHT] or don’t press any key, the snooze
function will open and ring again every fi ve minutes. It can repeat four times.
2). Press any key except [SNOOZE/LIGHT] to quit.
3). Press [SNOOZE/LIGHT],the back light will last 3 seconds.
Note:
If the humidity lower than 20%,the LCD will display LL%
If the humidity higher than 90%,the LCD will display HH%