Konig Electronic IP baby and child monitor - Manual (Page 6)

6
ENGLISH
6
Selecting the Wi-Fi router
Select the Wi-Fi router of your choice in the screen (see Figure 9).
Then select the tab
to enter next step (see Figure 10).
Figure 8 Figure 9 Figure 10
7
IP baby and child monitor connects with Wi-Fi router
Wait about 1-2 minutes. If the IP baby and child monitor is successfully connected to
the Wi-Fi router, the status LED will become orange.
Otherwise the status LED will become a flashing red light. If the setup is not
successful, please go back to Step 1 and try again.
8 If successful, select the tab: (see Figure 11), and follow the instructions.
Please enter a camera name and password for security and select the tab:
(see Figure 13).
9
The IP baby and child monitor will automatically enter the viewing screen (see
Figure 14).