English – Konig Electronic IP baby monitor User Manual

Page 24

Advertising
background image

ENGLISH

24

LED Colour

Description

Green slow flashing

Searching and Connecting to Wi-Fi router

(IP baby monitor will reboot automatically

every hour in this status)

Orange

Connected to Wi-Fi Router

Red fast flashing

WPS pairing failed

4) My IP baby monitor does not connect to the router.

It’s possible that there are too many Wi-Fi routers nearby using the same channel and they

interfere with each other.

a. Please move the IP baby monitor closer to the router to ensure a good Wi-Fi signal.

b. You may consider changing your Wi-Fi channel number, for example Ch1, Ch6, Ch11.

c. Please turn off power to the uCare Cam, wait 5 seconds, then turn power on to the

uCare Cam.

d. Please wait ~1 minute, then press the WPS/RESET key in back of uCare Cam.

e. Please wait ~1-2 minutes. The status LED should be flashing Red and Green. Please try

setup again following the instructions.

f. If the status LED does not flash Red & Green, please contact Customer Support.

5) How to check your Wi-Fi signal and coverage by Android App - Wi-Fi Analyzer?

Ans: There is a free android app “Wi-Fi Analyzer” that can scan and show all Wi-Fi SSID’s

around. User can change their Wi-Fi channel to avoid interference and get better signal

and coverage.

https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&feature=search_

result

6) What is the default account name and password?

Ans: Default password for IPCam is “0000”, default manager account is “admin”, password

is “0000”.

7) Why can’t IP baby monitor connect with Wi-Fi Router using WPS Mode?

a. Make sure the router’s WPS function is enabled.

b. Please try router model if WPS mode setup failed.

8) What is the frequency of email alerts and smartphone notify alerts?

Ans: Once motion or sound detection is triggered, then IP baby monitor will send email

and phone notifications immediately. If the trigger event continually happens, then the

email and phone notifications will be sent out a three minute interval.
The trigger event ends after 10 seconds if there is no continual motion or sound.

The minimum interval for email and phone notifications will be 11 seconds.

9) What is the estimated recording size of video per hour (video format .AVI)?

VGA 640 x 480

Continuous HQ (20 fps)

Continuous LQ (10 fps)

Frame Rate Priority

4 GB/Hour

2 GB/Hour

Image Quality Priority

8 GB/Hour

4 GB/Hour

Advertising