Konig Electronic Automatic blood pressure monitor - Manual (Page 4)

4
4. BODY POSTURE DURING MEASUREMENT
Sitting Measurement
a. Sit upright
b. Place the arm with the cuff in front of you on a desk or table with
the palm up.
c. The cuff should be at the same level as your heart.
Lying Down Measurement
a. Lie on your back
b. Place your arm straight along your side with your
palm up.
c. The cuff should be at the same level as your heart
5. TAKING A MEASUREMENT
a. With the cuff wrapped around your arm and your body in a comfortable position, press and
hold the button “ON/OFF” until the LCD display is activated. The display will fi rst verify then it
will set to read all zeros.
b. Once the LCD display reads all zeros, press and release the button “START”. The monitor will
then pump up the cuff, then release the air pressure from the cuff and then display the blood
pressure and pulse rate measurements on the LCD display.