Konig Electronic Digital personal scale - Manual (Page 2)

1
Advice for use and care:
Ensure the scale is on a flat, even and firm surface. Avoid carpet or soft surfaces.
Always weigh yourself with the same scale placed on the same surface. Uneven
floors may affect the reading.
The surface of the scale will be slippery if wet. Keep it dry!
Weigh yourself without clothing and footwear, before meals and always at the same
time of day. Keep the scale in a dry place to protect the electronic components.
Clean after use with a lightly damp cloth, do not use solvents or immerse the product
in water. Avoid overloading the scale, otherwise, permanent damage may occur. A
user who has any metal material inserted into his/her body may get differences in
measurement of body fat reading. Pacemaker users are advised against using this
device.
The scale is designed for household use only, not to be used for commercial
purposes.
Operating instructions
1. Put the scale on a hard flat surface (avoiding carpets or any soft surfaces)
2. Switch on the scale by with a slight tap on the glass platform near the LCD
display. Then wait a few seconds, the following will appear: 0.0 kg
Note: The scale will not work properly if you step on the scale before it shows
0.0. If this happens please start from the beginning of step 2.
3. Gently step on the scale. Put your feet parallel on the scale without moving and
wait whilst the scale computer weighs.
When you step off the scale, it will automatically switch off. (If no weighing is carried
out while the zero is being displayed, the scale will automatically switch themselves
off after approximately 6 seconds).
When the scale is overloaded (over 180Kg/396lb), the following will appear on the
screen: Err
When the battery needs replacement, the following will appear on the screen: LO