Konig Electronic 2-zone induction cooker 3400 W - Manual (Page 3)

3
ENGLISH
Enamelled
iron pot
Iron or
enamelled
iron pot
Cast-iron
pan
Iron pot Deep-fry pan Stainless
steel pot
Iron plate
Unsuitable pans
Heat-resistant glass, ceramic containers, copper, aluminium pans/pots. Round-bottom pans/
pots measuring less than 12 cm.
Rounded base
Pot
Aluminium/
Copper pot
Base measuring
less than 12 cm
Pans with stand Ceramic pot Heat-resistant
glass pot
Operating Instructions
This cooker has 6 or 7 buttons and a press control. See pictures below to determine which
diagram is suitable for your device. Operate as following:
1) Plug in the power cable and put a cooking utensil on the centre of the top plate.
All light indicators will be illuminated and you will hear a beep after 1 second. After the
beep the device will be in the off mode.
2) ON/OFF: Press the “ON/OFF” (1) button, the induction cooker will go to standby mode
and the digital display will show “--------”. Touch the “ON/OFF” button again, and the
induction cooker will shut down.
3) Power: In standby mode, press the “Power” (2) button. The cooker will be ready for use.
The power indicator light will glow and the digital display will show 1600. You can press
the “+”, “-” button to adjust the working power from 300 W to 2000 W. There are 8 power
levels; 300 W, 600 W, 900 W, 1200 W, 1400 W, 1600 W, 1800 W, and 2000 W.
4) Temp: Press the “Temp” (3) button, the corresponding indicator light will glow and the
digital display will show “150”. By pressing the “+” “-” button, adjust the temperature
from 60 °C to 240 °C. The plate has 8 corresponding temperature levels; 60 °C, 90 °C,
120 °C, 150 °C, 180 °C, 200 °C, 220 °C and 240 °C.
5) Time: in working mode, press the “Timer” (4) button. The digital display will show “00:30”
and flash for 5 seconds. During this period you can set the time. You can set the minutes
from 31-59 minutes by pressing the “+/^” (5) button. The time set will flash for 5 seconds
and then start working according to the time set. You can set the hours from 0 to 2 hours
by pressing the button the time you set will flash 5 seconds, then it will work according to
the time. The total time is “02:59”.
6) Turn off: Press “ON/OFF” in any mode and the cooker will stop heating.
7) Optional: Press the “Lock” (6) button to protect preinstalled settings from being changed.