Konig Electronic Film scanner with LCD 5 megapixel - Manual (Page 7)

77
English
Operation sequence
1. Put the negative film or the positive film into
the required accessory.
2. Insert the accessory into the accessory slot.
3. Insert a memory card into the memory card
slot.
4. If required, connect the USB cable to the
scanner and the PC.
5. Press the on/off button to switch on the
device.
6. Press the scan button to start scanning.
7. Remove the memory card from the memory
card slot.
8. If required, disconnect the USB cable from the
scanner and the PC.
9. Press the on/off button to switch off the
device.
10. Remove the accessory from the accessory slot.
11. Remove the negative film or the positive film
from the accessory.
Menu
5
4
3
2
1
Main menu
1. Capture mode
2. Exposure compensation
3. Resolution
4. Language
5. USB MSDC
3
2
1
Capture mode
1. Black & white
2. Positive film
3. Negative film
Exposure compensation
EV -2 ... EV +2
2
1
Resolution
1. 5 megapixels
2. 10 megapixels
Language
• English
• German
• Spanish
• French
• Italian
• Japanese
• Simplified Chinese
• Traditional Chinese
USB MSDC
1. Connect the USB cable to the scanner and the PC.
2. Press the on/off button to switch on the device.
3. Go to the main menu.
4. Select “USB MSDC“.
5. Click “OK”.
6. Open the folder on the PC to view the pictures on the PC.
Cleaning and maintenance
• Do not use cleaning solvents or abrasives.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth.
• Clean the glass plate using the cleaning brush
(brush side up).
Technical data
Power input 5 V DC
Lens F = 6.34 mm
Focus range Fixed focus
Sensor 1/3.2” CMOS
Image resolution
5 megapixels
10 megapixels
Film sensitivity Automatic
White balance Automatic
Exposure compensation Automatic
USB version USB 2.0
Memory card SD / MMC
File format JPEG
Operating system
Windows Vista / Windows 7 /
Windows 8 / Windows 8.1
Dimensions (LxWxH) 88 x 86 x 111 mm
Weight 300 g