Konig Electronic Universal remote control for 4 devices - Manual (Page 4)

4
NOTE: After exiting the multi-function settings, the remote control will revert to the
pre-multi-function setting mode. The remote control will have no connection with the
home appliances selected. Point the remote control at the TV set and press the “M1”
button (for all kinds of home appliances). The remote control will emit data code in this
order:
“TV power”
“AV/TV”
Clear Multi-Function Button
Setting Method:
1. Under the multi-function setting mode, press the corresponding M1/M2 button. This
eliminates a command button. After the multi-function button data is cleared, the
indicator light will flash three times.
2. To completely clear the multi-function button: Under the multi-function setting mode
press and release the multi-function button “M1/M2” until the indicator light flashes
three times. This shows that all functions have been cleared. Press any button to exit.
Maintenance:
Clean the product only with a dry cloth.
Do not use cleaning solvents or abrasives.
Warranty:
Any changes and/or modifications to the product will void the warranty. We cannot accept
any liability for damage caused by incorrect use of this product.
Disclaimer:
Designs and specifications are subject to change without prior notice. All logos, brands
and product names are trademarks or registered trademarks of their respective holders
and are hereby recognised as such.
Disposal:
• This product is designated for separate collection at an appropriate collection
point. Do not dispose of this product with household waste.
• For more information, contact the retailer or the local authority responsible for
waste management.