Specifications – Krix Atmospherix A20 User Manual
Page 6
6
specifications
warranty
5 years warranty applies to the cabinet and
speaker.
(Refer to the details on the warranty card
supplied)
queries
If you have any queries regarding the
Atmospherix or any other Krix product, please
contact your nearest Krix dealer or Krix
directly. Contact details are on the back cover
of this booklet.
45Hz - 40kHz in room response
20-120 watts RMS recommended amplifier power
90dB for 2.83 volts at 1 metre
5 inch 2-way
Cast aluminium basket with a nominal 130mm (5”) doped curvilinear
paper cone. 25mm (1”) voice coil wound on high powered aluminium
former with copper shorting ring. Vented and double magnet shielded
26mm (1”) dual concentric diaphragm with wave-guide centre plug
for controlled directivity. Neodymium magnet
2.1kHz
Nominally 8 ohms (minimum 4.9 ohms)
Bass reflex, front vented
295mm diameter x 185mm deep
247mm
White (can be painted to match your décor)
Push type connectors
8 litres
2.5kg each
Atmospherix AS
Frequency Range
Power Handling
Sensitivity
Configuration
Bass Driver(s)
Tweeter
Crossover Points
Impedance
Enclosure Type
Dimensions
Mounting cut-out diameter
Finish
Input Terminals
Internal Volume
Weight