Dukane SF4030 - Manual (Page 10)

1. Set unit on projection table in the vertical position (handle up).
2. Slide bottom door latches out and swing both doors around to
magnet latches. Pull out the entire power cord. Leave doors open.
3. Tip unit over to rest on its legs. (Doors act as feet for the unit).
4. Turn focus knob clockwise until it stops at the end of the mast.
5. Rotate mast up until it locks into place.
6. Rotate the projection head assembly counterclockwise to the
working position.
7. Open mirror.
SETUP INSTRUCTIONS SF MODELS
4
S
TEP
1 —
S
TEP
3 —
S
TEP
2 —
S
TEP
4 —
S
TEP
5 —
Slide
latches out
and swing
doors open.
Remove entire cord.
Doors must be
open for unit
to operate.