Labconco 10-Port Manifold - Manual (Page 2)

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 2 of 5
Figure 1
Hex Wrench Storage (Refer to Figure 2)
1. Remove 2 center screws that hold the back panel to the top wrapper.
2. Insert screws through one leg of the clamps.
3. Reinstall screws.
4. Snap hex wrench into clamps.
1/4" Socket Head
Cap Screw
1/4" Socket Head
Cap Screw,
Lockwasher and
Flat Washer
Tray Support Clip
Freeze Dryer
Tray
Hex Wrench
Manifold Assembly
Coupling
Retainer
Top of Cabinet
Back Panel Attaching Screw
Clamp
Figure 2